Ceramic coating at Paint Protection DFW starts at $1,249 for Dr. Beasley’s Nano Resin and $2,500 for Nano Resin PRO, the tier our site lists with a registered 25-year warranty. Matte and satin paint have their own coatings at the same two starting prices. If you also want film on the front end, our Full Front & Ceramic Coating package starts at $3,249.
The tier you pick matters, but so does what happens to the paint before any coating goes on. Here is how ceramic coating cost in DFW breaks down at our shop and how to choose a tier.
Ceramic coating prices at Paint Protection DFW
| Coating | Who it tends to suit | Starting price | Warranty listed on our site |
|---|---|---|---|
| Nano Resin | Daily drivers that want gloss and easier washing | $1,249 | Ask for terms with your quote |
| Nano Resin PRO | Owners keeping the car long term | $2,500 | Registered 25-year warranty |
| Nano Resin Matte Paint Coating | Matte or satin paint, without adding shine | $1,249 | Ask for terms with your quote |
| Nano Resin Matte Paint Coating PRO | Matte or satin paint, long term | $2,500 | Registered 25-year warranty |
| Full Front PPF & Nano Resin coating | Chip protection up front, coating on the rest of the car | $3,249 | Film and coating terms are separate |
The “who it tends to suit” column is our guidance, not a rule. Full product details are on our ceramic coating page.
What you are paying for
Prep is most of the work
A coating locks in whatever is underneath it, so the paint has to be clean and corrected first. Our process starts with washing, decontamination and polishing, which takes about 4 to 8 hours. Applying and curing the coating takes another 12 to 24 hours, and the final inspection and drying can take up to another day.
Prep is a big part of what you pay for, and a car with heavy swirls needs more of it than one that is nearly new. If your paint needs more correction, that will show up in the quote.
The coating tier
Nano Resin and Nano Resin PRO are different products, not the same coating with a different label. Dr. Beasley’s says Nano-Resin Pro is a 100% solids formula that builds 4 to 6 microns of protection once cured, and rates it for up to 25 years of protection with proper preparation, application and maintenance.
The size of the vehicle
A full-size truck or SUV has more paint to prep and coat than a compact coupe. That is part of why every quote is for a specific vehicle. You can see a coated truck on this RAM with a Dr. Beasley’s ceramic coating.
Nano Resin or Nano Resin PRO: how to choose
Start with how long you plan to keep the car. If it is a lease or a car you’ll sell in a few years, Nano Resin gives you the gloss and easier washing at the lower starting price. If you plan to keep it for many years, the PRO tier and its registered warranty make more sense. This BMW M5 CS with Nano Resin Pro is one example from our gallery.
Then think about the maintenance. A long warranty comes with conditions, and you should be comfortable with them before you pay for the longer tier.
A 25-year rating is not a maintenance-free promise
Dr. Beasley’s is clear that the 25-year figure describes the coating’s intended service life with proper care, not permission to stop washing the car. Its product page for Nano-Resin Pro says the 25-Year Service Life Limited Warranty applies to eligible installs by a Dr. Beasley’s Authorized Detailer and is subject to its terms.
Those terms, set out in the Dr. Beasley’s warranty and owner manual, are built around a maintenance routine: biweekly washing, quarterly reinforcement treatments and an annual inspection by an Authorized Detailer. The warranty also excludes damage from wash brushes, abrasive cloths and stone chips. Ask for the warranty registration and the maintenance schedule in writing when you book.
Is ceramic coating worth it in DFW?
It is worth it if you want paint that stays glossy and washes clean with less effort. Dirt and water release more easily from a coated surface, and the coating helps the paint resist UV and light contamination, which counts for a car that sits outside under the Texas sun.
It is not worth it if what you really want is chip protection. A coating is a very thin layer and doesn’t stop stones. For that you need film, which is why many owners pair the two. Our PPF packages include a Full Front & Ceramic Coating option that does both.
Getting a ceramic coating quote
Tell us your vehicle, the condition of the paint, whether it is gloss or matte, and how long you plan to keep it. We’ll recommend a tier and quote the prep your paint actually needs. You can request a ceramic coating quote and our team will follow up.
